NEAT CUTTING OILS

For maximum lubrication for the toughest machining jobs, our comprehensive range of Straight Cutting Oils has contributed to the efficiencies and operational improvements of various firms involved in the automotive and computer-parts industries in the Philippines.

Product

Viscosity (CST AT 40°C)

Recommended Material

Additive Type

Strengths

LubeRite MO10 10 Ferrous & Non-Ferrous Inactive EP additives High Speed Lathe operations

Aluminum machining

LubeRite MO28P 28 to 32 Ferrous & Non-Ferrous Inactive EP additives General Purpose Cutting Oil
Petrofer Isocut FS 32 Ferrous Active Sulfur and Chlorinated additives  Broaching and other Heavy Duty Cutting
Petrofer Isocut FS CH5 32 Ferrous Active Sulfur and Chlorinated additives Spline Rolling and other Heavy Duty Cutting
LubeRite MO13P  10-12 Ferrous Active Sulfur Lathe Operations on Stainless Steel

Small hole machining operations

LubeRite MO15 Super 10-12 Ferrous Active Sulfur and Esters Lathe Operations on Stainless Steel

Excellent Finish even on high feed rates

Petrofer Isocut VG 10 LS 10 Ferrous & Non-Ferrous Proprietary Mist Cutting

Low Smoking

LubeRite MO2H

LubeRite MO4H

2 or 5 Ferrous & Non-Ferrous Proprietary Grinding, Honing and other processes requiring low viscosity

Glass and Lens Grinding

High Flashpoint

Procut Liquid 150 Ferrous Metals Proprietary Tapping Fluid

Extremely Difficult Operations

AVAILABLE IN DRUMS AND PAIL

ELECTRIC DISCHARGE MACHINING FLUIDS

Our EDM Fluids are very special – these products are formulated using highly refined isoparaffinic base oils. Compared to conventional low-viscosity mineral-based oils, our fluids exhibit,

• Negligible Solvent Content
• Only Traces of Sulfur
• Clear Appearance and High Purity

To the end-user, this translates into lower evaporation rates, less skin irritation, as well as a
comfortable and safe work environment.

Product

Viscosity (CST AT 40°C)

Recommended Material

Strengths

LubeRite EDM 2 2 Ferrous & Non-Ferrous For super-tight cutting tolerances, excellent flushing ability
LubeRite EDM 4 4 Ferrous & Non-Ferrous For larger cuts, higher voltage cutting

AVAILABLE IN 20 L PAILS AND 200 L DRUMS

RUST PREVENTIVES

Protect your output by investing in the right Rust Preventive.

Product

Film

Protection

Carrier

Quaker Ferrocote 372T1 Dry and Waxy Long-term Indoor Protection

Dewatering Ability

Solvent
Quaker Ferrocote 372T2 Dry and Waxy Short-to-Medium term Indoor Protection

Dewatering Ability

Solvent
Petrofer Isotect HC Wet and Oily Long-term Indoor Protection Oil
Petrofer Isotect HC2 Wet and Oily Short-to-Medium term Indoor Protection Oil
Quaker Ferrocote 5802U2 Thick and Greasy Long-term Outdoor Protection High Viscosity Thixotriopic Oil
Petrofer Dewater D Dry and Waxy Short Term Indoor Protection

Excellent Dewatering

Solvent
Syntech Moisture Gard C Clear Film or Green Tinted Short-to-Medium term Indoor Protection

Spray Can* application for ease-of-use

Aerosol Propellant

AVAILABLE IN PAILS AND DRUMS, EXCEPT SYNTECH MOISTURE GARD C, IN 400ML SPRAY CANS

VCI (Volatile Corrosion Inhibitors)

VCI Papers and Films are among the most effective solutions for rust and corrosion protection in the metalworking industry.  They are easy to apply, and are available in an infinite number of sizes and shapes.  Moreover, they can be adjusted to the specific needs of your product, storage, and transportation requirements.

AVAILABLE VCI COATINGS

YBH Galvanizing coat
BM7010 Cast Iron
CTX Aluminum(Al), Iron(Fe)
RM56 Copper(Cu)
WMA Precious metals(Gold, Silver)

AVAILABLE IN SHEETS, ROLLS AND BAGS

WATER MISCIBLE CUTTING FLUIDS

Resource One Corporation offers the widest range of water-soluble cutting fluids in the Philippines.  We are certain that we can recommend a product that will suit your demanding applications.  Moreover, our company provides after-sales services that will enable you to maximize the usage of our fluids.

SYNTHETIC (OIL-FREE) FLUIDS

Product

Recommended Material

Operations

Recommended Concentration

Strengths

Reference

Quaker 2769DL Ferrous Metals All Grinding 3-5% Excellent Detergency

Cylindrical, Centerless & Surface Grinding

Transmission Shaft and CVJ Roller Grinding
Quaker 2772LF-D Ferrous and Non-Ferrous Metals All Grinding

Light and Moderate Machining

3-10% Excellent Lubricity for a Synthetic product Milling, Drilling, Boring of Moulds for Plastic Injection and Stamping
Petrofer Isogrind A20 Carbides All Grinding 3-5% Ideal for Carbide Grinding

No Cobalt Leaching

Carbide Grinding

ALL AVAILABLE IN DRUMS AND PAILS

EMULSIONS & MICRO-EMULSIONS (HIGH OIL CONTENT)

Product

Recommended Material

Operations

Recommended Concentration

Strengths

Reference

Quakercool 7200 HBFF Ferrous and Non-Ferrous Metals All Machining to include Drilling, Tapping, Reaming 5-10% Excellent Finish and Tool Life

Excellent for Aluminum Anti-corrosion

Aluminum Transmission Parts – Milling and Drilling

Motorcycle, Tapping and Boring

Petrofer Emulcut 351S/AS Ferrous and Non-Ferrous Metals All Machining operations 5-10% Standard Grade Aluminum Wheel Turning and Facing

ALL AVAILABLE IN DRUMS AND PAILS

SEMI-SYNTHETIC (MODERATE OIL CONTENT & VERSATILE)

Product

Recommended Material

Operations

Recommended Concentration

Strengths

Reference

Petrofer Emulcut S10 Ferrous and Non-Ferrous Metals All Machining operations 5-10% Bio-stable and Long-life – does not require addition of Biocides All Machining on Aluminum and Cast Iron Base Plate, for Compactors
Petrofer Emulcut S60 Ferrous and Non-Ferrous Metals All Machining operations

Grinding

5-10% Standard Grade for Non-Ferrous Metals

Bio-stable

All Machining for Forged Transmission Shaft and Gear Blanks
Petrofer Emulcut S50 Ferrous Metals All Machining operations

Grinding

5-10% Standard Grade for Non-Ferrous Metals

Bio-stable

Universal Joint Cross Lathe Operations

ALL AVAILABLE IN DRUMS AND PAILS